Tyson V. Rininger's Blog

TVRPhotography – If it moves, Shoot It!

Tag Archives: organize

Taming a GoPro

TVR_9028

Pictured above are two complete GoPro Hero 3+ Black systems and a range of accessories organized using three Cocoon Grid-it boards.

Pictured above are two complete GoPro Hero 3+ Black systems and a range of accessories organized using three Cocoon Grid-it boards.

Recently I ordered a bunch of GoPro stuff hoping to dive into video. Instead I ended up diving into a heap of random parts. As someone with a mild case of OCD, I needed to find a practical solution to not only organizing everything, but finding a system where I could account for each and every piece out in the field. I thought of old camera bags, Pelican cases, tool boxes, whatever, but none of those choices seemed like a solution to me.

Both GoPro kits are set up in an identical fashion so if only one set up is used, the other can provide reference insuring every piece is accounted for. Additionally, the pocket on the opposite side of the Grid-it board can hold a photo of the items and their placement for reference should both kits be needed.

Both GoPro kits are set up in an identical fashion so if only one set up is used, the other can provide reference insuring every piece is accounted for. Additionally, the pocket on the opposite side of the Grid-it board can hold a photo of the items and their placement for reference should both kits be needed.

Since I began photography back in the ’80’s, I’ve always had some sort of system. Making sure everything had a place and those places were occupied by everything meant that I should leave an event with the same number of items I arrived with. As aviation photography became more my forte, it became even more crucial that nothing gets left behind. If a random part were left on a tarmac or taxiway after a nighttime shoot, that part could easily get swallowed by the intake of an aircraft resulting in a very expensive mistake.

The third Grid-it board is used for random or one-off accessories such as spare backs, miscellaneous clamps and extensions as well as the touch display and charger.

The third Grid-it board is used for random or one-off accessories such as spare backs, miscellaneous clamps and extensions as well as the touch display and charger.

I had heard of a company called Cocoon and these boards with webbing aptly named ‘Grid-it’. On one side was a random series of straps used to secure small items and on the other side was a pocket perfectly sized for an iPad…or perhaps, instruction manuals, pens, lens cleaning tissues or whatever else you could fit. I ended up purchasing three of these for $25 each; one for each GoPro set up and one for the remaining oddball clamps, housings and other components.

An unexpected benefit to the system is the ability to cover the lens of each GoPro with the webbing meaning no scratches. Once all three boards are set, they can be stacked and placed in any bag safely. Removing a single board enables a complete set up to be used without messing up everything else.

Once everything is organized on each board, they can be stacked and placed in just about any bag.

Once everything is organized on each board, they can be stacked and placed in just about any bag.

There are no doubt other ways of organizing your system, hopefully this will just be another tool in your belt. And if this system ends up not being the best solution, the Grid-it boards can be used for just about anything.

As for a useful bag or carrying case, check out Sporty’s or PilotMall’s collection of flight bags. These bags are specifically designed to carry books, charts and other paperwork where the Grid-it boards will fit perfectly. Additionally, the exterior pockets will provide plenty of additional room for larger accessories and components that wouldn’t otherwise fit on the Grid-it boards.

Sporty’s Flight Bags

Cocoon Grid-it

Advertisements